iPhone 6 Plus Low current can't be turned on. After detection, it is found that the CPU RAM is deformed Inveracious Soldering, so it is replaced and soldered again, and the fault is repaired.
iPhone 6 Plus Bluetooth can't connect,Rear Camera doesn't work, replace WiFi module and Rear Camera, and the machine will return to normal.
iPhone 6s Plus mobile phone has no signal. After detection, it was found that IF VCC was disconnected, and the problem was fixed after Jump wire.
The iPhone 6 Plus mobile phone number has no service, and the problem is faulty, and it is caused by the U1V1 disconnection, and the problem is repaired after the flying line.
iPhone 6 Plus Right Screw Column Breaking Connectation Can't open the phone, because this screw hole is a 12C bus, so the fault repair after the re-flying line is scraped.
iPhone 6 Plus charges at night, the second day, the phone does not boot, it is caused by diode damage, after replacement problem repair
iPhone 6 Plus screen failure, replace the display, touch VCC chip and return to normal.
iPhone 6s rear Camera does not work, replace Camera failure remains, one line is fixed.
iPhone XS Max mobile phone can't be charged. After detection, this fault is caused by the damage of U3300 charging IC. The charging chip is directly replaced and the problem is fixed.
