Apple MacBook Air a1466 laptop cannot be started for maintenance

Apple MacBook Air a1466 notebook can not start SMD REWORK STATION. Remove this IC. Both PCB and IC pin6 are corrode Oxygenation. It seems that VIN 14.85v is not fully input into lt3470 pin6.Handle IC pin and PCB PAD, solder back lt3470 and blow off resistor Capacitor.Power on test returned to normal VCC 3.42v.Install the motherboard back into the c-shell, power on, boot into the system.

Apple MacBook Air a1466 laptop cannot be started for maintenance

Apple MacBook Air a1466 notebook can not start SMD REWORK STATION. Remove this IC. Both PCB and IC pin6 are corrode Oxygenation. It seems that VIN 14.85v is not fully input into lt3470 pin6.Handle IC pin and PCB PAD, solder back lt3470 and blow off resistor Capacitor.Power on test returned to normal VCC 3.42v.Install the motherboard back into the c-shell, power on, boot into the system.

[machine model] Apple MacBook Air a1466 (2017)

[fault phenomenon] the laptop cannot be started

[maintenance process]

A MacBook Air 2017 a1466 was repaired. Before the fault description, it always turned off automatically. Recently, the laptop couldn’t be started.This machine is twomobile phoneThere is a warranty label on the back, and one screw is missing from the D-shell.Press the power on key to find that the progress bar can occasionally appear, and then shut down auto power off

432;IMG_256
Apple MacBook Air a1466 laptop fails to start maintenance Figure 1

Remove the D-shell and remove the motherboard. It seems that the mainboard has never been repaired.

489;IMG_257
Apple MacBook Air a1466 laptop fails to start maintenance Figure 2

It is detected that the VCC is only 2.242v, and the normal VCC is 3.425v. It is normal to test the IC VIN 14.85v.

苹果MacBook Air A1466笔记本无法启动维修 图3

MacBook Air doesn’t start

苹果MacBook Air A1466笔记本无法启动维修 图4

Apple MacBook Air a1466 laptop fails to start maintenance Figure 4

Under the microscope, lt3470 has white corrode.

662;IMG_260
Apple MacBook Air a1466 laptop fails to start maintenance Figure 5

苹果MacBook Air A1466笔记本无法启动维修 图6

Apple MacBook Air a1466 laptop fails to start maintenance Figure 6

Remove the sealant Cleaning solvent next to it, and then remove the IC from SMD REWORK STATION. Both PCB and IC pin6 are corrode Oxygenation. It seems that VIN 14.85v is not completely input into lt3470 pin6.

苹果MacBook Air A1466笔记本无法启动维修 图7
Apple MacBook Air a1466 laptop fails to start maintenance Figure 7

苹果MacBook Air A1466笔记本无法启动维修 图8
Apple MacBook Air a1466 laptop fails to start maintenance figure 8

Handle IC pin and PCB PAD, solder back lt3470 and blow off resistor Capacitor.

905;IMG_264
Apple MacBook Air a1466 laptop fails to start maintenance Figure 9

Power on test returned to normal VCC 3.42v.

苹果MacBook Air A1466笔记本无法启动维修 图10
Apple MacBook Air a1466 laptop fails to start maintenance Figure 10

Install the motherboard back into the c-shell, power on, boot into the system.After testing for several hours under the power on state,auto power off was shut down stably, which perfectly repaired a relatively simple fault.

苹果MacBook Air A1466笔记本无法启动维修 图11

Apple MacBook Air a1466 laptop fails to start maintenance Figure 11